Home Select Items for Smart Control Page

The Select Items for Smart Control page allows you to specify the rooms, device types, Connected Lighting, or specific devices that you want to control through the Smart Control you are creating or editing. If you are creating or editing a smart switch Smart Control type, these are the rooms or devices that will be powered on or off with the master control you previously selected.

To select rooms or devices for your Smart Control:

  1. In the panel on the right side, click the Rooms, Type, or All tab to access the available rooms and devices that you can power on or off with the Smart Control. If you select the Rooms or Type tab, you can also click through the carousel that shows room names and device types below the tab.
  2. From the available rooms and devices under the Rooms, Type, or All tab, click to select a room or device you want to power on or off with the Smart Control, and then click the Add item button. Alternatively, you can drag the selected device to the panel on the left side.
  3. If you are creating a custom scene, select whether you want the device to power on or off when the Smart Control is activated. For Connected Lighting in a custom scene, you can also set the light's brightness by dragging the dimmer control up (brighter) or down (dimmer).
  4. Repeat steps 1 and 3 for each room or device you want to add to the Smart Control.
  5. The panel on the left side shows the rooms and devices you selected. If you need to remove a room or device, select it in the left panel and then click the Remove item button (or drag it back to the right panel).